In this month’s Managing Safety Performance News Paul digs into some of those recent events to see what we can use back on the job to make sure everyone goes home alive and well at the end of each and every day.
Behind every safety rule stands a reason. And that reason almost always has something to do with someone getting hurt, making “every safety rule written in blood.”
In this month’s Managing Safety Performance News I sent Paul to an ancient place and he came back with some very interesting and useful insights that he shares in this month’s News. I was rewarded and I suspect you will be too.
Machinery is everywhere: all that production equipment; maintenance equipment like mills lathes, welders; equipment moving equipment…
In this month’s Managing Safety Performance News Paul examines safety culture: What it is, why it matters, why it can be a problem, and what you need to know to change it. If you’re like me, you’ll get a lot of value out of what he has to say. You may even get a new appreciation of the paper that lines your hallways.
You’re driving a truck. On a narrow, one-way street, eastbound on a beautiful late summer morning. Your route calls for you to make a right turn…
In this month’s Managing Safety Performance News Paul examines making stop work decisions at work and the critical importance of that decision. Oh, yes, the client stopped the work and canceled the class in Houston. Our teacher did go to Salt Lake City so the client, in a Harvey-free area did not need to stop the work. Our teacher on the river stopped the work and headed to Fort Worth. Paul will give you some suggestions about making your stop work decisions.
When a traffic light turns green, how many people actually take the time think about the choices?
In this month’s Managing Safety Performance News Paul shares his thoughts on making real change occur. Sure, from time to time change has a lot of different names, but change by another name is still change. Humor aside, making change in the direction of sending people home alive and well at the end of every day is pretty darn important and Paul has some darn good advice on making that happen.
Fatigue is one of the many tough safety challenges every leader faces. Part of the problem is that the sources – or root causes – of fatigue don’t just come from one place.
In this month’s Flash we look at the difference between an expectation and an assumption. That distinction might seem subtle at first glance, however the difference found in the definitions proves a very critical point for anyone who leads and manages safety.
In this issue of Managing Safety Performance News, Paul looks at why separating “environment” from “safety” misses the point. Using real work examples—from hauling tools over a snowbank to executive debates about compliance—he makes the case that many hazards don’t come from the job itself, but from the conditions in which the work is done. By stripping injuries down to simple “headlines” and sorting them by the source of the hazard, patterns start to emerge that are easy to miss in root cause analysis reports. The takeaway is straightforward: environment and safety are inseparable, and leaders who want better safety performance need to see the work—and its hazards—clearly, from the moment it begins.
In this month’s Flash, we explore where hazards come from—and why that matters. Understanding their sources is a critical step in identifying what could cause harm.
This month Paul examines how leaders often misuse the phrase “it’s just common sense”—either to dismiss learning or to assume shared understanding without definition. He argues that many leadership statements presented as fact are really opinions, and that poor communication stems from assuming others interpret words, experience, and expectations the same way.
In this months Flash we are re-visiting the fundamental concept of getting folks to follow all of the rules, all of the time. As to how you might move the needle a great place to start is with PPE.
This month Paul shares that for twenty-five years, our work has been grounded in disciplined observation, analysis, and testing. That process has shaped how we identify the leadership practices that most directly influence safety performance—the same ideas we teach.
This month, we are pleased to feature an article by Newton Scavone, one of our most experienced members of the Balmert teaching team, based in São Paulo. Newton started as a client learning and using the MSP tools, then became one of the leaders developed to teach the course inside his company. For the last six years, many of you have known him as a Balmert Consulting teacher. He brings deep operational credibility and a clear understanding of what it takes to make these tools work in the real world.
In this month’s Flash, we take a look at a very important first step to ensure conversations go as well as they ought to when expectations around safety haven’t been met.
This month, Paul takes on one of the toughest challenges every leader faces — managing hazards. Not just the big, obvious ones that make the “A List,” but the ordinary, everyday things that cause most of the injuries. He reminds us that managing hazards isn’t about eliminating every risk; it’s about handling them — and the people around them — “with a degree of skill and care.”
In this months Flash we look at the importance of Safety Rules, and a very critical concept about the rules that ensures they help keep us safe.
English 
Portuguese 
Spanish 
Russian 
French 
Italian